Measure door hardware with context.
Dimension, layout, mechanics, and access-control DC calculations for U.S. locksmiths.
Find your tool2.375 × 25.4
60.325 millimeters
Follow the worked exampleStart with a task
All task guides- What does a dimensional difference tell me about lock fit?
Choose a dimensional comparison, stack total, repeated-reading summary, or bounded chain, then identify what the result establishes about lock fit.
- How do I check a printed or repositioned door-hardware template?
Check drawing identity, printed scale, coordinate references, and independent points before using a door-hardware layout.
- How do I build a DC source budget without counting converter losses twice?
Keep device states, load and source sides, converter efficiency, and internal cabinet losses clear in a stated DC budget.
- What information is needed before calculating an access-control cable run?
Identify resistance basis, one-way distance, return paths, load currents, and cable dimensions before calculating a DC cable run.
Start with your measurement
All measurement toolsDimensions & conversion
Keep measurements, units, and limits clear.
- Inch & millimeter converterConvert fractional or decimal inches to millimeters, or decimal millimeters to inches, with explicit rounding.
- Dimensional comparisonFind the signed difference between target and measured dimensions, with an optional check against limits you supply.
- Stacked thickness calculatorAdd measured layers in inches or millimeters and retain the exact total.
- Repeated measurement statistics calculatorCalculate mean, observed range, and sample standard deviation for repeated measurements of the same dimension.
Installation geometry
Calculate template positions, cut geometry, and coverage from your drawing.
- Template coordinate calculatorReflect, rotate, and translate a list of hole-center coordinates using an explicit origin and axis convention.
- Router template offset calculatorFind guide-bushing offset and nominal rectangular template dimensions for an internal window or external template.
- Countersink depth calculatorCalculate ideal countersink depth or conical drill-point height and tip depth from diameters, included angle, and your stated full-diameter depth.
- Print scale calibration calculatorCalculate a print-scale correction from a stated reference length, its printed measurement, and the scale setting used.
Door planning
Work with explicit dimensions, geometry, density, and force.
- Door weight calculatorEstimate homogeneous solid mass from volume and supplied density, or rectangular panel mass from supplied weight per unit area.
- Door swing geometry calculatorFind a point’s position, straight-line displacement, and arc travel around a fixed pivot.
- Door leaf dimensions calculatorSubtract your stated gaps from a clear opening to calculate one door leaf or two equal leaves.
- Full-mortise hinge width calculatorCalculate minimum open hinge width using Hager’s stated full-mortise geometry and dimensions you supply.
Access control DC
Budget stated loads, wire voltage drop, and ideal charge requirements.
- DC load budget calculatorCalculate total current and power for each of two stated load scenarios at one DC voltage.
- Two-wire DC voltage drop calculatorCalculate two-wire DC voltage drop, a theoretical one-way length limit, or compare supplied conductor candidates against an explicit minimum load voltage.
- Ideal battery charge calculatorCalculate ideal hours from amp-hours and constant current, or amp-hours from current and time.
- DC branch network calculatorCalculate segment currents, node voltages, and conductor loss in a tree of stated constant-current DC loads.
Keep the reference with the result.
A number needs a unit, a measurement reference, and its limits. Matching dimensions alone cannot establish product compatibility.
Read the methods and references