Compare actual cross sections, not trade-size labels
Enter the circular pathway’s clear internal diameter and each cable’s actual outside diameter. Trade sizes are not automatically internal diameters. This tool sums ideal circular areas; it does not solve a cable packing layout or apply a permitted fill percentage.
Area-ratio calculation
Cable area = Σ quantity × π × outside diameter² / 4
Pathway area = π × inside diameter² / 4
Occupancy = cable area / pathway area × 100%
For four 5 mm cables in a 20 mm clear diameter, π cancels in the ratio: 4 × 5² / 20² × 100 = 25%. Total cable area is 25π ≈ 78.540 mm² and clear area 100π ≈ 314.159 mm². One cable equal to the pathway diameter gives 100% area ratio; this is not practical pulling clearance.
All diameters must be positive, with 1–30 rows and integer counts 1–1,000. Results may exceed 100%; the tool reports the arithmetic instead of changing it to a pass. Displays round to three decimals, with ratio calculated before rounding.
Cable shape, bundles, packing voids, bend radius, pulling tension, connectors, existing contents, segregation, heat, and jurisdiction/product requirements remain separate. Use actual approved instructions and applicable rules for the installation; no universal regulatory fill limit is assumed.