Calculate the effect of a stated pressure difference
This tool integrates a uniform net pressure normal to a rectangular face. The vertical pivot axis is on one edge. Enter the pressure difference across the door, not the absolute atmospheric pressure. It is a load-effect calculation; the site does not determine design wind pressure.
Area, resultant, and moment
Force = net pressure × width × height
Edge-axis moment = force × width / 2
The resultant of uniform pressure acts at the face center. This applies force and torque equilibrium principles. Use consistent area units: a width and height in inches require division by 144 for square feet. One pascal is one N/m².
Independent example
A hypothetical 36 × 80 in face has area 20 ft². At 10 psf net pressure, force is 200 lbf. The half-width is 1.5 ft, so the moment is 300 lbf·ft, approximately 406.745 N·m. Zero net pressure returns zero force and moment. Width and height must be positive.
Displays use three-decimal rounding after unit conversion. This assumes uniform pressure over the complete face. Open-door aerodynamics, changing pressure with angle, a pivot inside the door, closer linkage, latch force, and local design criteria are outside the model. The result is not a required handle force or a closer-selection recommendation.