Ideal torsion spring calculator

Calculate resisting torque and added elastic energy from an explicit linear torsional stiffness and winding angles.

Your inputs

Use decimal values in the labeled units. Fractions, scientific notation, and missing values are not treated as valid numbers.

Positive constant supplied for the defined model; not N·m/degree.
0–360 relative to the zero-torque position.
0–360; this model only adds winding.

Enter your values or load the labeled example.

Your result

Waiting for your inputs

Your results will appear here after calculation.

Ideal linear torsional stiffness in N·m/rad. Nonnegative preload and additional rotation both wind the spring in the same direction. No manufacturer curve, hysteresis, spring life, permitted travel, or actual hinge performance is inferred.

Keep spring stiffness and applied torque separate

An ideal linear torsion spring resists rotation in proportion to angular displacement from its zero-torque position. This tool combines the initial winding with an additional rotation in the same winding direction. It does not infer stiffness from a hinge size or a door weight.

Torque and energy model

θ₀ = preload degrees × π / 180; θ₁ = (preload + turn) × π / 180
T₀ = kθ₀; T₁ = kθ₁; added energy = k(θ₁² − θ₀²) / 2

Energy follows integration of the linear resisting torque. This is the rotational form of the linear elastic potential-energy model, not a claim that a commercial spring hinge is linear. Stiffness is in N·m per radian, even though input angles are in degrees.

Independent example

With hypothetical stiffness 10 N·m/rad, no preload, and 90° additional winding, final torque is 10 × π/2 ≈ 15.708 N·m; stored energy increases by 10 × (π/2)² / 2 ≈ 12.337 J. Zero additional rotation adds no energy. Positive preload still produces initial torque.

Three-decimal outputs follow numerical radian conversion. Preload and additional winding are each limited to 0–360° by this model’s input range, not a product rating. Real spring nonlinearity, friction, hysteresis, permitted travel, fatigue, stops, and hinge/door suitability require actual product data. The static torque tool instead calculates a moment from a specified external force.