Separate bare LEDs from complete indicators
Access-control key switches can include LED indicators, as shown in SDC’s 700 Series resources. A complete rated indicator may already have internal current control. This calculator instead covers a deliberately defined bare-LED/resistor branch for analysis; it does not tell you to alter a product indicator.
One resistor per branch
Resistor voltage = source voltage − series count × LED forward voltage
R = resistor voltage / branch current
Resistor dissipation = resistor voltage × branch current
For 12 V, one LED at hypothetical 2 V, and 10 mA, resistor voltage is 10 V, theoretical resistance 1,000 Ω, and dissipation 0.1 W per branch. Two separately resisted branches draw 0.02 A in total. This is not a resistor wattage recommendation or a preferred-value selection.
Source voltage must exceed total stated LED forward voltage; equality and negative headroom are rejected. Counts are integers 1–1,000 and current positive. Exact decimal arithmetic precedes three-decimal display rounding. LED forward voltage varies with current, part, and temperature, so worst-case source/LED conditions and actual component ratings still require separate design work. No resistor should be shared between the ideal parallel branches in this model.