Rectangular frame miter calculator

Calculate short- and long-point lengths for four equal-width members meeting at 45-degree miters around a rectangular opening.

Your inputs

Inches accept decimals and fractions. Millimeters accept decimals. Changing units reinterprets the numbers; it does not convert them.

Enter your values or load the labeled example.

Your result

Waiting for your inputs

Your results will appear here after calculation.

Four-sided planar rectangular frame, equal face-width stock, 90° corners, no rebate or compound bevel. Inside dimensions are short-point dimensions. No assembly allowance, kerf, or stock optimization is assumed.

Distinguish inside dimensions and long points

For a rectangular frame with equal face-width members and 90° corners, the inside opening gives each member’s short-point length. The outer long points extend by one face width at each end. This model covers a planar surround, not a compound casing profile or rebated structural door frame.

Four-member cut list

Horizontal long point = inside width + 2 × face width
Vertical long point = inside height + 2 × face width
Each end: 45° from a square crosscut

For 36 × 80 in inside dimensions and 2 in face width, cut two horizontal members with 36 in short / 40 in long points and two vertical members with 80 in short / 84 in long points. Face width and both opening dimensions must be positive.

This is an exact geometric cut list, displayed to three decimals. It includes no manufacturing allowance, saw kerf, wall irregularity, rebate, profile orientation, or connection design. Use the stock cutting planner separately if your required finished cut lengths and stock/kerf conditions match its model; it does not infer these miter dimensions for you.