State the switch-off circuit before calculating decay
An inductive DC load stores magnetic energy, but its current decay depends on the entire switch-off path. This tool supports only a source-free series inductor/resistor loop. A flyback diode, TVS, active clamp, or remaining supply changes that model and cannot be represented by silently substituting a convenient resistance.
Exponential current and energy
Initial energy = LI₀²/2; time constant = L/R
I(t) = I₀e^(−Rt/L)
Time to Ithreshold = (L/R) ln(I₀/Ithreshold)
The RL circuit derivation supports this isolated resistive decay. With 1 H, 10 Ω, initial 1 A and threshold 0.5 A, initial energy is 0.5 J, τ is 0.1 s, and crossing time is 0.1 ln 2 ≈ 0.069 s.
All quantities must be positive and threshold below initial current. Zero-current threshold is rejected because exponential decay reaches zero only asymptotically. Displays round to three decimals after numerical logarithms; energy and time constant use exact decimal algebra before display.
The tool does not know a lock’s inductance, magnetic remanence, mechanical release threshold, temperature dependence, or suppression circuit. A calculated electrical threshold time is not actual lock release time, fire-system performance, or an approved suppression recommendation.